1 US2411 p-ch 20v fast switching mosfets symbol parameter rating units v ds drain-source voltage -20 v v gs gate-sou r ce voltage 8 v i d @t a =25 continuous drain current, v gs @ -4.5v 1 -3 a i d @t a =70 continuous drain current, v gs @ -4.5v 1 -2.4 a i dm pulsed drain current 2 -12 a p d @t a =25 total power dissipation 3 1 w t stg storage temperature range -55 to 150 t j operating junction temperature range -55 to 150 symbol parameter typ. max. unit r ja thermal resistance junction-ambient 1 --- 125 /w r jc thermal resistance junction-case 1 --- 80 /w id -20v 80m ? -3a the US2411 is the highest performance trench p-ch mosfets with extreme high cell density , which provide excellent rdson and gate charge for most of the small power switching and load switch applications. the US2411 meet the rohs and green product requirement with full function reliability approved. z advanced high cell density trench technology z super low gate charge z excellent cdv/dt effect decline z green device available general description features applications z high frequency point-of-load synchronous small power switching for mb/nb/umpc/vga z networking dc-dc power system z load switch absolute maximum ratings thermal data sot23 pin configuration product summery bv dss r ds(on)
2 p-ch 20v fast switching mosfets symbol parameter conditions min. typ. max. unit bv dss drain-source breakdown voltage v gs =0v , i d =-250ua -20 --- --- v bv dss / t j bvdss temperature coefficient reference to 25 , i d =-1ma --- -0.014 --- v/ r ds(on) static drain-source on-resistance 2 v gs =-4.5v , i d =-3a --- 65 80 m v gs =-2.5v , i d =-2a --- 80 100 v gs =-1.8v , i d =-1.5a 105 130 v gs(th) gate threshold voltage v gs =v ds , i d =-250ua -0.3 -0.5 -1.0 v v gs(th) v gs(th) temperature coefficient --- 2.3 --- mv/ i dss drain-source leakage current v ds =-16v , v gs =0v , t j =25 --- --- -1 ua v ds =-16v , v gs =0v , t j =55 --- --- -5 i gss gate-source leakage current v gs = 8v , v ds =0v --- --- 100 na gfs forward transconductance v ds =-5v , i d =-3a --- 12.2 --- s q g total gate charge (-4.5v) v ds =-15v , v gs =-4.5v , i d =-3a --- 10.1 14.1 nc q gs gate-source charge --- 1.21 1.7 q gd gate-drain charge --- 2.46 3.4 t d(on) turn-on delay time v dd =-10v , v gs =-4.5v , r g =3.3 i d =-3a --- 5.6 11.2 ns t r rise time --- 32.2 58 t d(off) turn-off delay time --- 45.6 91 t f fall time --- 29.2 58.4 c iss input capacitance v ds =-15v , v gs =0v , f=1mhz --- 677 948 pf c oss output capacitance --- 82 115 c rss reverse transfer capacitance --- 73 102 symbol parameter conditions min. typ. max. unit i s continuous source current 1,4 v g =v d =0v , force current --- --- -3 a i sm pulsed source current 2,4 --- --- -12 a v sd diode forward voltage 2 v gs =0v , i s =-1a , t j =25 --- --- -1 v t rr reverse recovery time i f =-3a , di/dt=100a/s , t j =25 --- 29 --- ns q rr reverse recovery charge --- 8 --- nc note : 1.the data tested by surface mounted on a 1 inch 2 fr-4 board with 2oz copper. 2.the data tested by pulsed , pulse width Q 300us , duty cycle Q 2% 3.the power dissipation is limited by 150 junction temperature 4.the data is theoretically the same as i d and i dm , in real applications , should be limited by total power dissipation. electrical characteristics (t j =25 , unless otherwise noted) diode characteristics US2411
3 p-ch 20v fast switching mosfets 0 2 4 6 8 10 12 00.511.52 -v ds , drain-to-source voltage (v) -i d drain current (a) v gs =-4.5v v gs =-3v v gs =-2.5v v gs =-1.8v v gs =-5v 40 65 90 115 140 165 12345 -v gs (v) r dson (m ? ) i d =-3a 0 2 4 6 8 10 00.40.81.2 -v sd , source-to-drain voltage (v) -i s source current(a) t j =150 t j =25 0.2 0.6 1 1.4 1.8 -50 0 50 100 150 t j ,junction temperature ( ) normalized v gs(th) 0.2 0.6 1.0 1.4 1.8 -50 0 50 100 150 t j , junction temperature ( ) normalized on resistance typical characteristics fig.1 typical output characteristics fig.2 on-resistance vs. gate-source fig.3 forward characteristics of reverse fig.4 gate-charge characteristics fig.5 normalized v gs(th) vs. t j fig.6 normalized r dson vs. t j US2411
4 p-ch 20v fast switching mosfets 10 100 1000 159131721 -v ds , drain to source voltage (v) capacitance (pf) f=1.0mhz ciss coss crss 0.01 0.10 1.00 10.00 100.00 0.1 1 10 100 -v ds (v) -i d (a) t a =25 single pulse 1s 10ms 100ms dc 100us 0.0001 0.001 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 t , pulse width (s) normalized thermal response (r ja ) p dm d = t on /t t jpeak = t a + p dm x r ja t on t 0.02 0.01 0.05 0.1 0.2 duty=0.5 single pulse fig.8 safe operating area fig.9 normalized maximum transient thermal impedance fig.7 capacitance fig.10 switching time waveform fig.11 gate charge waveform US2411
|
